POE - 12 PORT Poe Injector (Poe Patch Panel ) 802.3AF /AT

POE - 12 PORT Poe Injector (Poe Patch Panel ) 802.3AF /AT

Features

12 Port POE panel is compatible with all Ethernet switches

It is used in VoIP, IP camera, security solutions, and Wi-Fi projects for cable management and voltage output control.

When 48V power supply is made, Mode A power supply type 802.3AF and 802.3AT features are active (Suitable Mode A and Mode B power supply inputs are available on the back of the device).

In other words, for IP cameras or VoIP phones, Wi-Fi access points, and POE supported products, direct POE power supply is provided on all devices that support 802.3AF and 802.3AT, allowing you to gain the POE feature without using a POE switch.

Each port has an automatic protected (can be turned on and off) surge protection of 650mA for 18-57 volts.

12 ports POE panel

Passive POE and 802.3af POE are used with 4/5 pin (+) for voltage and -7/8 pin (-) for -7/8.

It can be used for POE energy transmission up to 100 meters with a popular Ubiquiti cable (for 24 or 48V ).

When used with a LAN role control product, you can reset/reboot all 12 devices from a single point.

Adapters are sold separately. They need to be acquired based on your project.

For 802.11AF/AT usage, at least a 48V -7.2A adapter is recommended.

For other products (used as a passive POE injector), a 24V-10-15A product can be used.