POE - 16 PORT Gigabit Poe Injector

NOT : ÜRÜNÜN MONTAJ İŞLEMLERİ YAPILACAĞINDAN KARGO SEVK SÜRESİ FARKLILIK GÖSTEREBİLİR.

Features  

16 Port Gigabit POE panel is compatible with all Ethernet switches. 

It is used in VoIP, IP camera, security solutions, and Wi-Fi projects for cable management and voltage output management. When 48V powering is required, the Mode B power supply feature of 802.3AF and 802.3AT comes into play. 

In other words, for IP cameras or VoIP phones, Wi-Fi access points, and POE supported devices, this provides direct POE power supply in all devices that support 802.3AF and 802.3AT, 
thus allowing you to add the POE feature to your existing switches without using a POE switch. 

Each port has independent current protection of 650mA for 18-57 volts. 
This means that if any port fails, the entire panel will not shut down; other systems will continue to operate. 

16 Port Gigabit POE panel

Passive POE and 802.3af POE inputs use the 4/5 pin (+) for voltage and the -7/8 pin (-) for -7/8. The popular Ubiquiti cable can be used for POE energy transmission up to 100 meters (24 or 48V). When used with the LAN Rollo control product, you can reset/reboot all 12 devices in the 12 ports from a single point.  

The required adapters are sold separately and may need to be ordered based on your project. Additionally, a 24V and 48V built-in adapter model is available. For 802.11AF/AT usage, at least a 48V -7.2A adapter is recommended. For other products (24V passive POE injector), a 24V-10-15A product can be used.