6-35Volt Input 6-55V Output Step-UP Voltage Booster, Converter 200W

6-35Volt Input 6-55V Output Step-UP Voltage Booster, adjustable converter 200Watt

This is a high-quality voltage regulator that can adjust the output voltage from 6-55V based on an input voltage range of 6-35 (DC) Volts. It is particularly useful for systems powered by 24V solar energy, allowing for voltage boost to levels such as 48-55V in an economical manner. Voltage reduction to a lower value than the input is not possible; for example, if you input 12V, you can only boost it up to a maximum of 55V. The amperage at the input must be adjusted according to the required output voltage and wattage.

For example: If you need a 48V - 48W output, and you are powering it with 24V, the required input amperage would be: (Desired output wattage) 48Watt / 24Volt = 2Amper - required input amperage.

Calculation formula:
Watt = Volt * Amper
Amper = Watt / Volt

This product is commonly used in projects where voltage regulation is needed to restore the required energy levels after voltage drop from long-distance cable usage, particularly in IP camera projects. It has been tested for operation with passive PoE and 48V access points. The product can be used for mobile testing or operation.

The voltage range can be adjusted using the adjustment screw included in the product box. Before use, check the output values with a measuring instrument. The product does not have built-in short-circuit protection. Appropriate insurance must be used at the output. The manufacturer or seller is not responsible for device failures due to improper use.

This is a hobby product.

Input Voltage: 6V-35V

Output Voltage (adjustable): 6V-55V

Max: 200WATT

No built-in short-circuit protection.