LM2596 Adjustable DC/DC Voltage Regulator - Klemensli

LM2596 Adjustable DC/DC Voltage Regulator - Klemensli

4-35V input DC voltage can be converted to an output DC voltage range of 1.25-30V. This is a DC/DC adjustable voltage regulator card.

Some projects may require different output voltages despite having different input voltages. This card is designed to meet such needs.

Time is often wasted in projects due to simple voltage regulation issues. This product was produced as a solution to these issues during the prototype stage.

For example, connect 12V to the input and get the desired voltage output of 3.3V, 5V, 9V. This product is used to obtain lower output voltages than the input voltage. It is not used to increase the voltage.

Note: The device voltage is set using the potentiometer on the product. You need to calibrate the potentiometer with a multimeter when you first run the product.

Connect the supply voltage to the input pins (IN). Connect the measuring device to the output pins (OUT). Turn the potentiometer approximately 15-20 times in either direction and slowly adjust the output voltage in the range where you see a change in voltage.

If you apply a load to the product of more than 3A, it will shut down. As a precaution, it is recommended not to draw more than 2A for a long time. Drawing 1A or less will improve the device's stability.

Features

• Input Voltage Range: 4-35V
• Adjustable Output Voltage Range: 1.25-30V
• Output Current: 3A (Max)
• Sensitive potentiometer for voltage adjustment
• Operating Temperature: -45℃ to +85℃
• Dimensions:
• Width: 20mm
• Length: 57.15mm
• Height: 14.15mm

Package Contents

• 1 x Adjustable 3A Voltage Regulator Card - LM2596-ADJ
• 1 x Heat Sink